-
4th February 2010, 05:25 PM
#11
@Koleax: Sick. xD
@Eloï: Are you using the dpad to pull the BRs? Amazing.
@afatsuoM: Yeah leungbok is a robot, a dpad-robot! Damn. But after about four
weeks using the dpad I could improve upon myself, I can now pull the BR on TDR
over the little crest
, but not yet as constant as leugi can do.
Btw; what's your recording set-up? Are you able to do a 60fps recording as well?
I also wanna do a new video going for zone 160 on Syncopia this year. Just a
small advise on AP; do not go too far to the right just before entering the
narrowed section, it really kills a lot of perfect zones otherwise. You actually
have to steer into this corner properly using the stick and using the airbrakes
as less as possible. At very high speeds the slightest touch on the airbrakes
can set you off completely. A good entrance can be found while aligning the
craft with respect to the right line marked onto the track. This line serves
also as a reference. Depending on your position and orientation to this line,
just before entering the right-hand turn, will determine your steering input
through the narrowed section! The overpass is another story. The moment
before jumping of off the ramp your craft carries a certain momentum depending
on your last steering inputs. If you remember this, then you will know exactly
how to steer the craft while running over the overpass. Hope this helps.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules